The MCP series are close-coupled monobloc single stage centrifugal industrial pumps, with a flanged hydraulics motor connection, electric motor with extended shaft directly connected to the pump , pump casing with axial suction and radial delivery on top. The design of these machines allows the rotating parts and the motor to be removed from the pump casing without having to disconnect the pipes. Thus maintenance is easily and quickly performed. The pumps may be installed in all positions, except where the suction point is directed downwards.
Pumps should be installed in a covered area, protected against the weather.

Max ambient temperature up to 40
Fluid temperature should be from -20~ +140
Max pressure up to 10bar


Pump Body: cast iron
Motor Housing: cast iron
Shaft: 45#steel/stainless steel
Impeller: cast iron
Motor: closed, externally ventilated
Insulation Class: B /F
Protection Class: IP54
Duty: continuously rated
Mechanical Seal: ceramic steatite/ metalized carbon
Main dimensions and performance according to EN 733
Flanges connection according to PN10, EN1092-2,
DN32-DN80 as per UNI2236PN10 standards
Pump casing according to
DIN 24255-NF E 44 III-UNI 7467 standards
©SANHE ELECTRICAL (FUJIAN)CO.,LTD. Tel :+86-593-6377866 6377877 Fax:+86-593-6377899